Invisible Waterproof Coating Sealant Agent Transparent Sealing Coating Strong Insulating Sealant Clear Sealant Repair Tool 300g

Product Specifications:

-- Product storage: The product should be sealed and placed in a cool and dry place.

-- Reference area: The overall application of 300g is 2 square meters, and the application of 600g is about 4 square meters.

Product Features:

-- Powerful Sealant:

Transparent waterproof agent can instantly seal most surfaces with any material. It's a potent sealant that provides an efficient and immediate solution to seal and repair broken surfaces.

-- Easy and Instant Sealing:

We are delighted to offer mighty paste polyurethane that allows for quick, instant sealing and repair of cracked surfaces. Meet the innovative power of our sealing adhesive.

-- Advanced Formulation:

Toilet anti-leak glue is an advanced sealant that effectively seals and repairs damaged surfaces. It's a paintable water-based sealant, useful for waterproofing various surfaces.

-- Flexible and Leak-Proof:

Despite its toughness, invisible paste sealant provides a flexible protective layer to the applied surface. It features leak-proof capabilities and is applicable even on wet surfaces due to its high bonding strength. It's transparent and possesses non-yellowing properties.

-- Strong Adhesion:

With its high bonding strength, polyurethane glue can easily and quickly adhere to most surfaces, proving especially useful when protection is needed. It can be applied instantly, providing immediate necessary protection.

Construction Precautions:

1. Before construction, clean the tile floor and keep it free from dirt and sewage stains. If the gap between the tiles is too deep, first fill the gap with a leak stopper. The product does not need to be mixed, and can be brushed immediately after opening the cover. Before construction, the floor drain should be blocked to prevent glue leakage.

2. For large-scale construction, it is recommended to start with the wall and then the ground, and start from the inside to the outside to facilitate the exit of construction personnel. During construction, the gel should be brushed as thin as possible (faster film drying), and the key positions (such as toilet edges/floor drains/wall corner gaps) should be painted twice (for better results). During construction, it should be painted in one go, Form a continuous and flat waterproof film on the base surface.

3. After construction, it is recommended to ventilate the site. Before the gel is dried and solidified, it should not come into contact with water or step on. When the gel is at room temperature above 20 ℃, it should dry after 2 hours and form a film within 5 hours. The slower the temperature is, the slower the curing process may be (the curing time may be affected by low winter temperatures).

Due to differences in coating thickness and roughness, the curing time may vary slightly. Based on the actual curing time, the waterproof adhesive can be used for 1-2 years, with modified acrylic acid as the main component. After construction, it is transparent and colorless, and the waterproof effect is very good. Transparent waterproof adhesive can be used in bathrooms. It is a new type of waterproof adhesive that is green, environmentally friendly, has a long service life, and has good waterproof and mold proof effects.